• 18-SP419
    24" Shaft
    Fits all rollers except large radius roll and encoder drive

    18-SP420
    24" Shaft w/ encoder drive
    Drilled and tapped on both ends for encoder drive pulley
  • 18-SP432
    18" Motor Drive Shaft for Horizontal Module
  • 18-SP431
    16" Motor Drive Shaft for Vertical Module
  • 18-SP430
    15 5/8" Idler Shaft
  • 18-SP430B
    Radius Roll Shaft
  • 18-SP430A
    Satellite Shaft
  • 01-041
    Single Roller Bearing (Sealed)

    Large radius roll only
  • 01-040
    Double Roller Bearing (Sealed)

    Fits all rollers except large radius roll
  • 12-0633
    Bearing Retainer

    Adjustable Rolls will use 4 pcs
    Stationary Rolls will use 2 pcs
  • 02-320
    Top O-Ring

    Horizontal Module Only
  • 12-0635
    Bearing Dust Cover (aluminum)

    Horizontal Module Only
  • 02-315
    Bottom O-Ring

    Horizontal Module Only
  • 18-SP438
    Bearing Dust Cover (bowl)

    Horizontal Module Only
  • 18-SP438A
    Bearing Dust Cover (top front)

    Horizontal Module Only
    qty:3
  • 18-SP438B
    Bearing Dust Cover (top rear)

    Horizontal Module Only
    qty:2
  • 01-409
    19 Tooth Sprocket

    Radius Roll Shaft Only
  • 01-407
    18 Tooth Sprocket

    Intermediate Shaft to Motor Drive Shaft
  • 01-405
    16 Tooth Sprocket

    All Roller Drive Shafts except 4 1/2" roll and 4 3/4" roll
  • 01-410
    26 Tooth Sprocket

    Sprocket that connects the chain from the motor to the drive shaft

    (Note: The 26 Tooth Sprocket replaced a 16 Tooth Sprocket to increase the driving torque)
  • 01-460
    13 Tooth Sprocket

    5HP Motor
    Motor Drive Shaft to Intermediate Shaft
    Intermediate Shaft to Radius Roll Shaft
    Roller Drive Shaft for 4 1/2" Roll and 4 3/4" Roll
  • 01-135
    1 3/4" Taper Lock Bushing

    All Shafts (except Motor Output)
  • 01-130
    1 1/2" Taper Lock Bushing

    5HP Motor Output Only
  • 18-SP434
    Chain Tensioner Yoke for Radius Roll (aka Horseshoe)
  • TBA-6
    Idler Arm with Sprocket
  • 18-SP446
    Idler Tension Sprocket For Intermediate Shaft
  • 01-216
    #60 Chain

    Used on all parts of the machine
  • 01-185
    #60 Master Link
  • 01-180
    #60 Half Link
  • Cap and Bolt for Vertical Module Rollers

    04-173
    Cap

    03-297
    1/2" Flat Head Bolt
  • Cap and Bolt for Horizontal Module Rollers

    04-173
    Cap

    03-271
    1/2" Lock Washer

    03-295
    1/2" Hex Bolt
  • 04-353
    3/8" Spacer (Behind Roller)
  • 04-353
    3/4" Spacer (Behind Sprocket)
  • 04-353
    1 3/16" Spacer (12" Radius Roll Only)
  • 04-353
    2" Spacer for idler shaft

    04-173
    Cap

    03-271
    1/2" Lock Washer

    03-295
    1/2" Hex Bolt
THIS IS A SPACER