• 18-B131
    26" Diameter Turntable

    RMS / Arnold #14 Bender
    RMS / Arnold #18 Bender

    NOTE: CUSTOMER MUST SPECIFY DROP IN OR THREADED CENTER BUSHING, ALSO MUST SPECIFY RECESSED OR FLUSH CENTER BUSHING
  • 18-B127
    20" Diameter Turntable

    RMS / Arnold #11 Bender

    NOTE: CUSTOMER MUST SPECIFY DROP IN OR THREADED CENTER BUSHING
  • 05-0501
    Stirrupmaster Turntable
    RMS Stirrupmaster
  • 02-060
    Drill Bushing Standard
    Bushings used in all turntable holes (except center hole)
    This is the standard size bushing.
  • 02-040
    Drill Bushing .002 Oversize
    Bushings used in all turntable holes (except center hole)
    Oversized bushings are only used when holes are too worn
    to use the standard bushing.
  • 02-034
    14-18 Center Bushing (new style w/ Shoulder)
    #14 Benders with new style turntable
    #18 Benders with new style turntable

    1 3/4" ID
    2 1/2" OD
    2 3/4" OD at shoulder
  • 02-064
    11 Center Bushing (new style w/ Shoulder)
    #11 Benders with new style turntable

    1 3/8" ID
    2 1/4" OD
    2 1/2" OD at shoulder
  • 02-035
    14-18 Center Bushing (old style)
    #14 RMS Benders with old style turntable
    #18 RMS Benders with old style turntable

    2 1/4" OD
    1 3/4" ID
  • 02-065
    11 Center Bushing (old style)
    #11 Benders with old style turntable

    2 1/4" OD
    1 3/8" ID
  • 18-B275
    Threaded Center Bushing DMI
    Arnold / DMI #14 and #18 Benders with threaded center only

    3 1/16" OD
    Threaded Center
  • 18-B275A
    Threaded Center Bushing RMS
    RMS #14 and #18 Benders with threaded center only

    2 3/4" OD
    Threaded Center
  • 18-B100
    Screw Bushing Adapter
    This bushing will allow you to use 1 3/8" drop-in pins in your threaded center hole

    *NOTE - REQUIRES SPANNER WRENCH PART 18-B141
  • 18-B141
    Spanner Wrench
  • 18-B099
    Emergency Flapper with Clamp
  • 62-130
    Inverter Interface Board for RMS #11 Bender
  • 10-0233
    Limit Switch with Cable
  • 18-B110
    Emergency Flapper Switch with Magnetic Base
  • 02-245
    Magnetic Base
  • 09-123
    Switch Bracket for Magnetic Base

    03-032
    Flat Head Bolt for Magnetic Base
  • 18-B109
    Emergency Flapper Switch with Bracket for Backup Ram
  • 18-B109A
    Switch Bracket for Backup Ram
  • 18-B139
    Socket Driver
  • 18-B104
    Backup Barrell Single
    NOTE - CUSTOMER MUST SPECIFY (RH OR LH) and (RMS OR DMI)
  • 18-B112
    Backup Barrell Double (Arnold / DMI Benders only)
    NOTE - CUSTOMER MUST SPECIFY (RH OR LH
  • 02-070
    Camlock (Heavy Duty)
    All RMS Benders
  • 02-075
    Camlock (Small)
    All Arnold / DMI Benders
  • 18-B1001
    Locking Plate and bolt for Backup Roller
  • 18-B106
    Backup Head with Roller
  • 18-B101
    Backup Head Roller Only
  • 18-B103
    Backup Head Special Tall
  • 18-B102
    Backup Head Roller Special Tall
  • 18-B116
    Epoxy Backup Ram with Epoxy Head
  • 18-B115
    Backup Ram with Head
  • 18-B105
    Backup Shaft without Head
  • 18-B113
    Long Gear Rack
  • 18-B111
    Dog for Camlocks
  • 18-B137
    Large Drop Plug
    18-B137B
    Small Drop Plug (Fits All 1 3/8" Holes)
    18-B137C
    Bolt Plug
  • 13-005A
    Small Drop Plug (MDS Plastic)
    Fits All 1 3/8" Holes
  • 18-B000
    Rebar Protractor 17" long
  • 18-B096C
    No Touch Tool
    *NOTE - ALSO REQUIRES PART 18-B010
  • 18-B998
    Auto No Touch Tool for Benders
  • 18-B142
    Stirrup Bar Attachment
  • 18-B136
    Small Radius Attachment
  • 02-205
    7 Ton Jack (for small radius attachment)
  • 18-B073A
    BMC Security Enclosure with Stand
  • 18-B075
    BMC Enclosure with stand
  • 18-B074
    BMC Enclosure only
THIS IS A SPACER