• 01-025
    Bearing 2 15/16"
    #11 RMS / DMI / Arnold Bender Upper and Lower Main Shaft
    #14 RMS / DMI / Arnold Bender Lower Main Shaft
    #14 RMS / DMI / Arnold Bender Upper and Lower Pinion Shaft
    #18 RMS / DMI / Arnold Bender Upper and Lower Pinion Shaft
  • 01-030
    Bearing 3 15/16"
    #14 RMS / DMI / Arnold Bender Upper Main Shaft
    #18 RMS / DMI / Arnold Bender Upper and Lower Main Shaft
  • 01-055
    Bearing 2 3/16"
    #11 RMS / DMI / Arnold Bender Upper and Lower Pinion Shaft
  • 01-235
    Small Pinion Gear
    #11 RMS / Arnold / DMI Bender Pinion Shaft
  • 01-240
    Large Pinion Gear
    #14 RMS / Arnold / DMI Bender Pinion Shaft
    #18 RMS / Arnold / DMI Bender Pinion Shaft
  • 18-B081
    48 Tooth Gear
    #11 Bender
  • 18-B083
    60 Tooth Gear
    #14 Bender
    #18 Bender
  • 18-B131
    26" Diameter Turntable

    RMS / Arnold #14 Bender
    RMS / Arnold #18 Bender

    NOTE: CUSTOMER MUST SPECIFY DROP IN OR THREADED CENTER BUSHING, ALSO MUST SPECIFY RECESSED OR FLUSH CENTER BUSHING
  • 18-B127
    20" Diameter Turntable

    RMS / Arnold #11 Bender

    NOTE: CUSTOMER MUST SPECIFY DROP IN OR THREADED CENTER BUSHING
  • 05-0501
    Stirrupmaster Turntable
    RMS Stirrupmaster
  • Drivetrain Coupler (MOTOR TO TRANSMISSION)
    ALL #14 and #18 Benders

    01-155
    1 7/8" Bushing (MOTOR OUTPUT SHAFT)

    01-145
    1 1/4" Bushing (TRANSMISSION INPUT SHAFT)

    01-465
    20 tooth sprocket (2 REQUIRED)

    01-200
    Double Connecting Chain

    01-205
    Double Master Link

  • Drivetrain Coupler (TRANSMISSION TO HUB CITY VERTICAL DRIVE)
    #14 Bender with Hub City Vertical Drive Only

    01-145
    1 1/4" Bushing (TRANSMISSION OUTPUT SHAFT)

    01-140
    1 1/2" Bushing (HUB CITY VERTICAL DRIVE INPUT SHAFT)

    01-465
    20 tooth sprocket (2 REQUIRED)

    01-200
    Double Connecting Chain

    01-205
    Double Master Link
  • Drivetrain Coupler (TRANSMISSION TO HUB CITY VERTICAL DRIVE)
    #18 Bender with Hub City Vertical Drive Only

    01-145
    1 1/4" Bushing (TRANSMISSION OUTPUT SHAFT)

    01-150
    1 3/4" Bushing (HUB CITY VERTICAL DRIVE INPUT SHAFT)

    01-465
    20 tooth sprocket (2 REQUIRED)

    01-200
    Double Connecting Chain

    01-205
    Double Master Link
  • Drivetrain Coupler (TRANSMISSION TO CURTIS VERTICAL DRIVE)
    #14 Bender with Curtis Vertical Drive Only

    01-145
    1 1/4" Bushing (TRANSMISSION OUTPUT SHAFT)

    01-137
    1 3/8" Bushing (CURTIS VERTICAL DRIVE INPUT SHAFT)

    01-465
    20 tooth sprocket (2 REQUIRED)

    01-200
    Double Connecting Chain

    01-205
    Double Master Link
  • Drivetrain Coupler (TRANSMISSION TO CURTIS VERTICAL DRIVE)
    #18 Bender with Curtis Vertical Drive Only

    01-145
    1 1/4" Bushing (TRANSMISSION OUTPUT SHAFT)

    01-137A
    2" Bushing (CURTIS VERTICAL DRIVE INPUT SHAFT)

    01-465
    20 tooth sprocket (2 REQUIRED)

    01-200
    Double Connecting Chain

    01-205
    Double Master Link<
  • 01-430
    Vertical Drive Output Sprocket
    #14 RMS Benders with Hub City Vertical Drive Only

    *NOTE - MUST BE BORED OUT TO 1 1/2"
  • 01-385
    Vertical Drive Output Sprocket
    #18 RMS Benders with Hub City Vertical Drive Only

    *NOTE - MUST BE BORED OUT TO 2"
  • 01-395
    40 Tooth Sprocket
    #18 RMS Bender Pinion Shaft
  • 01-440
    40 Tooth Sprocket
    #11 RMS / DMI / Arnold Bender
    #14 RMS / DMI / Arnold Bender
  • 01-110
    Bushing R1 2 15/16"
    #14 RMS / DMI / Arnold Bender 40 Tooth Sprocket on Pinion Shaft
    #18 RMS / DMI / Arnold Bender 40 Tooth Sprocket on Pinion Shaft
  • 01-115
    Bushing
    #11 Bender 40 Tooth Sprocket on Pinion Shaf
  • 01-220
    #80 Chain
    11 Bender
    14 Bender
  • 01-210
    #100 Chain
    18 Bender
  • 01-165
    #100 Master Link
    18 Bender
  • 18-B121A
    #18 Main Shaft
    #18 RMS / DMI / Arnold Bender
  • 18-B121
    #14 Main Shaft
    #14 RMS / DMI / Arnold Bender
  • 18-B123
    14-18 Pinion Shaft
    #14 RMS / DMI / Arnold Bender
    #18 RMS / DMI / Arnold Bender
  • 18-B201
    #11 Main Shaft
    #11 RMS / DMI / Arnold Bender
  • 18-B205
    #11 Pinion Shaft
    #11 RMS / DMI / Arnold Bender
  • 18-SM200
    Stirrupmaster Main Shaft and Stationary Table
    RMS Stirrupmaster
  • 01-505
    4 Speed Transmission
    #14 RMS / DMI / Arnold Bender
    #18 RMS / DMI / Arnold Bender
  • 01-260
    Vertical Drive
    Most #18 Benders
  • 01-285
    Vertical Drive
    Most #14 Benders
  • 01-260A
    Curtis Vertical Drive
    Some #18 Benders
  • 01-285A
    Curtis Vertical Drive
    Some #14 Benders
  • 01-255
    Bearing for #1000 / #800 new style input & output shaft
  • 01-283
    Input Seal #800 new style
  • 01-290
    Bearing for #800 old style input & output shafts
  • 01-295
    Cup for #800 old style input & output shafts
  • 01-300
    Cup for #1000 / #800 new style input & output shafts
  • 01-310
    Seal #1000 input & output shaft Seal
    Seal #800 input & output shaft Seal
  • 01-325
    Top Seal for old style gearbox
THIS IS A SPACER