• 16-0088
    Suction Ball Valve
  • 06-309
    Coupling (Suction Tube to Ball Valve)
  • 06-313
    Split Flange (Coupling to Elbow)
  • 06-305
    90 Degree Elbow
  • 06-311
    Split Flange (Pump to Elbow)
  • 02-354
    PVC Coupling (old style suction filter only)
  • 04-275
    Return Pipe (24" long)
  • 16-0084
    Ball Valve (for case drain)
  • 17-247
    5000 PSI Gauge

    17-246
    Quick Disconnect Coupler

    17-245
    Diagnostic Nipple
  • 17-280
    Pressure Filter Inlet
    90 degree fitting
  • 17-282
    "A" port on front of Hydraulic Pump (case drain)
    90 degree fitting
  • 17-875
    Dual Hold Down Cylinder Only
    90 degree fitting
  • Top of Hold Down Cylinder

    17-310
    90 degree fitting

    17-717
    Straight flared fitting
  • 17-908
    Bottom of Main Cylinder and
    Pressure Port of Hydraulic Pump
    Straight flared fitting
  • 17-276
    "B" port on back of Hydraulic Pump
    Straight flared fitting
  • Top of Main Cylinder

    17-910
    Flare tee

    17-912
    Large Nut

    17-913
    Large Flare Fitting

    17-911
    Small Nut

    17-914
    Small Flare Fitting
  • Bottom of Hold Down Cylinder

    17-215
    Tee

    17-883
    Small Straight Flare Fitting (to P.O. check valve)

    17-309
    Straight Fitting (to bottom of Hold Down cylinder)

    17-878
    90 degree fitting (to "B" port on manifold)
  • P.O. Check Valve

    16-0019
    P.O. Check Valve

    17-903
    90 degree fitting (to top of main cylinder tee)

    17-314
    Small flared Fitting (to top of Hold Down Cylinder)

    17-462
    Small flared fitting (to bottom of Hold Down Cylinder)
  • 04-479
    Pipe - Pressure Filter to Manifold
    (8 1/4" long)

    17-294
    90 degree compression fitting (to pressure filter)

    17-284
    Straight compression fitting (to manifold)
  • Flare Fittings for Manifold
    17-278
    Large flare fitting

    17-279
    Medium flare fitting

    17-277
    Small flare fitting
  • Caps for Manifold
    These caps are used to protect the manifold
    during maintenance of the hydraulic system

    17-893
    Large Cap

    17-891
    Medium Cap

    17-889
    Small Cap
  • Plugs for Hoses
    These plugs are used to prevent leakage from the cylinders
    during maintenance of the hydraulic system

    17-894
    Large Plug

    17-892
    Medium Plug

    17-890
    Small Plug
THIS IS A SPACER