RMS 18 Bender

The most powerful rebar bender in the industry

The RMS 18 Bender is built with the same drivetrain as the RMS 14 Bender with a few important upgrades. It features a heavier top plate, larger bearings, and upsized chain and sprockets. This machine is capable of bending any size rebar, including #18 (55mm). Each machine is built of heavy welded steel members and reinforced at all stress points. Only high quality, name brand components are used.

The RMS 18 Bender is capable of bending stirrups, trusses, offsets, as well as all general bending. Changeover time, from light to heavy bending, takes less than one minute. Specialized attachments are also available for bending radius bars, small truss bars and small ties and stirrups.

All RMS Benders come standard with the RMS Bender Controller. The controller is advanced and user-friendly. Multiple bending stations can be programmed to bend clockwise or counter-clockwise. This alows you to bend closed ties or truss bars without having to manually turn bars over.

Operation of the machine and controls can be mastered within a short period of time. The machine includes several built-in safety features, such as foot pedal operation, emergency stop switches, and a manual override switch. In the event of a machine malfunction, the controller will display pertinent information to the operator.

The RMS 18 Bender has been designed from the ground up to be easily maintained. We always keep a healthy stock of machine parts at our factory. Most parts can be shipped on an overnight basis if needed.

Like all our machinery, the RMS 18 Bender conforms to UL Standard 508A Industrial Control Panels and is Certified to CAN/CSA Standard C22.2 No.14-05 Industrial Control Equipment

18 Bender Turn Table
14 Bender Pinch Switches
Bender Controlls
Bender Controlls