RMS 11 Bender

The RMS 11 Bender is an excellent light bender with a capacity up to #11 (35mm) rebar

The RMS 11 Bender is powered by a 5 HP motor and controlled by 7.5 HP VFD that adds additional torque and allows the machine to run smoother than normally possible. This drive greatly reduces wear and tear on motors and brakes, and allows electronically selectable bending speeds via the controller.

Despite the fact this is our smallest bender, it is built to a higher standard than competitive machines of similar capacity. Each machine is built from heavy welded steel members and reinforced at all stress points. Only high quality, name brand components are used.

The RMS 11 Bender is capable of bending stirrups, trusses, offsets, as well as all general bending. Changeover time, from light to heavy bending, takes less than one minute. Specialized attachments are also available for bending radius bars, small truss bars and small ties and stirrups.

All RMS Benders come standard with the RMS Bender Controller. The controller is advanced and user-friendly. Multiple bending stations can be programmed to bend clockwise or counter-clockwise. This alows you to bend closed ties or truss bars without having to manually turn bars over.

Operation of the machine and controls can be mastered within a short period of time. The machine includes several built-in safety features, such as foot pedal operation, emergency stop switches, and a manual override switch. In the event of a machine malfunction, the controller will display pertinent information to the operator.

The RMS 11 Bender has been designed from the ground up to be easily maintained. We always keep a healthy stock of machine parts at our factory. Most parts can be shipped on an overnight basis if needed.

Like all our machinery, the RMS 11 Bender conforms to UL Standard 508A Industrial Control Panels and is Certified to CAN/CSA Standard C22.2 No.14-05 Industrial Control Equipment

11 Bender Turn Table
11 Bender Controls
Pinch Point Switches
Bender Micro Controller